Snapdrive for Unix
본 한국어 번역은 사용자 편의를 위해 제공되는 기계 번역입니다. 영어 버전과 한국어 버전이 서로 어긋나는 경우에는 언제나 영어 버전이 우선합니다.

지원되는 구성을 확인하는 중입니다

기여자

SnapDrive for UNIX에서는 호스트 시스템의 구성 요소(예: 운영 체제, 호스트에 설치된 소프트웨어 버전, 프로토콜, 호스트의 파일 시스템 등)와 'napdrive.conf' 파일의 각 구성 매개 변수에 지정된 값을 검사하여 지원되는 구성을 확인할 수 있습니다.

단계
  1. 지원되는 구성을 확인합니다.

    ' * sdconfcheck check check * '

    [root@scspr0023764001 bin]# sdconfcheck check
    
    NOTE: SnapDrive Configuration Checker is using the data file version  v12052013
      Please make sure that you are using the latest version.
      Refer to the SnapDrive for Unix Installation and Administration Guide for more details.
    
    Detected Intel/AMD x64 Architecture
    Detected Linux OS
    Detected sg3_utils 1.28
    Detected Kernel Version 2.6.32-358.el6.x86_64
    Detected LVM_SUPPRESS_FD_WARNINGS has not set
    Detected Multipathing version 0.4.9
    Detected /etc/multipath.conf file not found
    Detected Host OS Red Hat Enterprise Linux 6.0 Update 4
    Detected NFSv3 FileSystem on Linux
    Detected Software iSCSI on Linux
    Detected NFSv4 Filesystem on Linux
    Detected   Ext4 File System
    Detected   Linux Native LVM2
    Detected   Linux Native MPIO
    
    Did not find any supported cluster solutions.
    
    Did not find any supported HU tool kits.
    
    Trace-Enabled: on
    Trace-Level: 7
    
    Supported Configurations on this host by SDU Version 5.2.2
    -------------------------------------------------------------
    Linux NFS Configuration
    [root@scspr0023764001 bin]#

    출력에 나열된 구성 요소를 확인하고 누락된 구성 요소를 설치 또는 구성합니다.