Creating a LUN

You use the Create LUN wizard to create a LUN. The wizard also creates the igroup and maps the LUN to the igroup, which enables the specified host to access the LUN.

Before you begin

About this task

If your organization has a naming convention, you should use names for the LUN, volume, and so on that fit your convention. Otherwise, you should accept the default names.

Procedure

  1. Navigate to the LUNs window.
  2. Click Create.
  3. Browse and select an SVM in which you want to create the LUNs.
    The Create LUN Wizard is displayed.
  4. On the General Properties page, select the LUN type Windows 2008 or later for LUNs used directly by the Windows host, or select Hyper-V for LUNs containing virtual hard disks (VHDs) for Hyper-V virtual machines.
    Leave the Thin Provisioned check box unselected.
    Illustration shows dialog box with Thin Provisioned check box unselected.
  5. On the LUN Container page, select an existing FlexVol volume.
    You must ensure that there is enough space in the volume. If sufficient space is not available in the existing volumes, you can create a new volume.
  6. On the Initiators Mapping page, click Add Initiator Group, enter the required information on the General tab, and then on the Initiators tab, enter all the WWPNs of the host FC ports that you recorded.
  7. Confirm the details, and then click Finish to complete the wizard.