INFORMATIONAL

This message occurs when a small form-factor pluggable (SFP) is inserted into the Fibre Channel (FC) target adapter.

You can obtain detailed SFP information by using the 'fcp adapter show' command.

An SFP was inserted into FC target adapter %s.

adapter (STRING): Target adapter name.

ERROR

This message occurs when an invalid Small Form-factor Pluggable (SFP) is inserted into the adapter. For example, a 10-GB SFP was inserted into an 8-GB FC adapter.

Replace the SFP with a supported SFP.

The SFP in FC adapter %s is not valid. (%s)

adapter (STRING): Target adapter name.
reason (STRING): Reason for invalid SFP.

INFORMATIONAL

This message occurs when a Small Form-factor Pluggable (SFP) is removed from the Fibre Channel (FC) target adapter.

(None).

An SFP was removed from FC target adapter %s.

adapter (STRING): Target adapter name.

ERROR

This message occurs when a small form-factor pluggable (SFP) that is not supported for FCoE links is inserted into an adapter that is configured for FCoE. For example, a 1-GB SFP is inserted into a converged network adapter (CNA) port. Note that the underlying Ethernet link might still be supported with the original SFP.

Replace the SFP with an SFP that supports FCoE link speed.

The SFP in FC adapter %s does not support 10 Gbit/sec speed. FCoE is supported only at 10 Gbit/sec and so the FCoE link will not be online.

adapter (STRING): Target adapter name.