Skip to main content
Active IQ Unified Manager 9.13
A newer release of this product is available.

Configuring ONTAP cluster

Contributors
PDFs

You need to perform few pre-configuration steps on ONTAP clusters before you can back up and restore Active IQ Unified Manager using Snapshot copy on Windows systems.

You can configure ONTAP cluster using either the command prompt or System Manager user interface. The configuration of ONTAP cluster involves configuring Data LIFs to be available to be assigned as iSCSI LIFs to the storage VM. The next step is to configure an iSCSI enabled storage VM using the System Manager user interface. You will need to configure a static network route for this storage VM to control how LIFs use the network for outbound traffic.

Note

You should have a dedicated volume and a LUN for backup configuration. The selected volume should include only one LUN. The size of the LUN should be at least twice the data size expected to be handled by Active IQ Unified Manager.

You need to perform the following configuration:

Steps

  1. Configure a iSCSI enabled storage VM or use an existing storage VM that has the same configuration.

  2. Configure a network route for the configured storage VM.

  3. Configure a volume of appropriate capacity and a single LUN inside ensuring that the volume is dedicated only for this LUN.

    Note In a scenario when the LUN is created on System Manager, unmapping the LUN might delete the igroup, and restore might fail. To avoid this scenario, ensure that while creating a LUN, it is created explicitly and is not deleted when the LUN is unmapped.

  4. Configure an initiator group in the storage VM.

  5. Configure a port set.

  6. Integrate the igroup with the portset.

  7. Map the LUN to the igroup.