DELL EMC Data Domain data collector
This data collector gathers inventory and performance information from DELL EMC Data Domain deduplication storage systems. To configure this data collector, there are specific configuration instructions and usage recommendations you must follow.
Terminology
Data Infrastructure Insights acquires the following inventory information from the Data Domain data collector. For each asset type acquired by Data Infrastructure Insights, the most common terminology used for this asset is shown. When viewing or troubleshooting this data collector, keep the following terminology in mind:
Vendor/Model Term | Data Infrastructure Insights Term |
---|---|
Disk |
Disk |
Array |
Storage |
FC Port |
Port |
File System |
Internal Volume |
Quota |
Quota |
NFS and CIFS share |
FileShare |
Note: These are common terminology mappings only and might not represent every case for this data colletor.
Requirements
You need the following information to configure this data collector:
-
IP address of the Data Domain device
-
Read-only user name and password to the Data Domain storage
-
SSH port 22
Configuration
Field | Description |
---|---|
IP address |
The IP address or fully-qualified domain name of the Data Domain storage array |
User name |
The user name for the Data Domain storage array |
Password |
The password for the Data Domain storage array |
Advanced configuration
Field | Description |
---|---|
Inventory Poll Interval (min) |
Interval between inventory polls. The default is 20. |
SSH Port |
SSH service port |
Troubleshooting
Additional information on this Data Collector may be found from the Support page or in the Data Collector Support Matrix.