Skip to main content
Data Infrastructure Insights

Hitachi Ops Center data collector

Contributors netapp-alavoie ostiguy
PDFs

This data collector uses Hitachi Ops Center's integrated suite of applications to access inventory and performance data of multiple storage devices. For inventory and capacity discovery, your Ops Center installation must include both the "Common Services" and "Administrator" components. For performance collection, you must additionally have "Analyzer" deployed.

Terminology

Data Infrastructure Insights acquires the following inventory information from this data collector. For each asset type acquired by Data Infrastructure Insights, the most common terminology used for this asset is shown. When viewing or troubleshooting this data collector, keep the following terminology in mind:

Vendor/Model Term Data Infrastructure Insights Term

Storage Systems

Storage

Volume

Volume

Parity Groups

Storage Pool(RAID), Disk Groups

Disk

Disk

Storage Pool

Storage Pool(Thin, SNAP)

External Parity Groups

Storage Pool(Backend), Disk Groups

Port

Storage Node → Controller Node → Port

Host Groups

Volume Mapping and Masking

Volume Pairs

Storage Synchronization

Note: These are common terminology mappings only and might not represent every case for this data collector.

Inventory Requirements

You must have the following in order to collect inventory data:

  • IP address or hostname of the Ops Center server hosting the "Common Services" component

  • Root/sysadmin user account and password that exist on all servers hosting Ops Center components. HDS did not implement REST API support for usage by LDAP/SSO users until Ops Center 10.8+

Performance requirements

The following requirements must be met in order to collect performance data:

The HDS Ops Center "Analyzer" module must be installed
Storage arrays must be feeding the Ops Center "Analyzer" module

Configuration

Field Description

Hitachi Ops Center IP Address

IP address or fully-qualified domain name of the Ops Center server hosting the "Common Services" component

User Name

User name for the Ops Center server.

Password

Password used for the Ops Center server.

Advanced configuration

Field

Description

Connection Type

HTTPS (port 443) is the default

Override TCP Port

Specify the port to use if not the default

Inventory Poll Interval (min)

Interval between inventory polls. The default is 40.

Choose 'Exclude' or 'Include' to specify a list

Specify whether to include or exclude the array list below when collecting data.

Filter device List

Comma-separated list of device serial numbers to include or exclude

Performance Poll Interval (sec)

Interval between performance polls. The default is 300.

Additional information may be found from the Support page or in the Data Collector Support Matrix.