Enable controller data transfer

09/10/2024 Contributors

The enable controller dataTransfer command revives a controller that has become quiesced while running diagnostics.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Syntax

enable controller [(a|b)] dataTransfer

Parameter

Parameter Description

Parameter	Description
`controller`	The controller that you want to revive. Valid controller identifiers are `a` or `b`, where `a` is the controller in slot A, and `b` is the controller in slot B. Enclose the controller identifier in square brackets ([ ]). If you do not specify a controller, the storage management software returns a syntax error.

controller

The controller that you want to revive. Valid controller identifiers are a or b, where a is the controller in slot A, and b is the controller in slot B. Enclose the controller identifier in square brackets ([ ]). If you do not specify a controller, the storage management software returns a syntax error.

Minimum firmware level

6.10