Rename SSD cache

09/10/2024 Contributors

The set ssdCache command changes the name of the SSD cache.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600, and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Support Admin role.

Syntax

set ssdCache [old_ssdCacheName] userLabel="new_ssdCacheName"

Parameter

Parameter Description

Parameter	Description
`ssdCache`	The name of the SSD cache that you want to rename. Enclose the SSD cache name in square brackets ([ ]). If the SSD cache name has special characters or consists only of numbers, you also must enclose the SSD cache name in double quotation marks (" ") inside square brackets.
`userLabel`	The new name for the SSD cache. Enclose the name in double quotation marks (" ").You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the identifier. Identifiers can have a maximum of 30 characters.

ssdCache

The name of the SSD cache that you want to rename. Enclose the SSD cache name in square brackets ([ ]). If the SSD cache name has special characters or consists only of numbers, you also must enclose the SSD cache name in double quotation marks (" ") inside square brackets.

userLabel

The new name for the SSD cache. Enclose the name in double quotation marks (" ").You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the identifier. Identifiers can have a maximum of 30 characters.

Minimum firmware level

7.84

11.80 adds EF600 and EF300 array support