Skip to main content
SANtricity commands

Save drive log

Contributors netapp-driley
PDFs

The save allDrives logFile command saves the drive logs to a file.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

Drive log data is maintained by the storage array for each drive.

Note

Do not run this command unless you are instructed to do so by technical support.

Syntax

save allDrives logFile="filename"

Parameter

Parameter Description

logFile

The file path and the file name to which you want to save the drive logs. Enclose the file name in double quotation marks (" "). For example:

file="C:\Program Files\CLI\logs\drive01.zip"

Note

This command does not automatically append a file extension to the saved file. You must specify the .zip file extension when entering the file name.

Minimum firmware level

6.10