Skip to main content
SANtricity commands

Set storage array management interface - SANtricity CLI

Contributors netapp-driley
PDFs

The set storageArray managementInterface command changes the management interface of the controller. Change the management interface type to enforce confidentiality between the storage array and its management software or to access external tools.

Note Starting with SANtricity 12.00, this command is removed as the storage array will always operate in the restOnly=true mode.

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600, EF300, EF50, and EF80 storage arrays. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, EF300, EF50, or EF80 storage array, you must have the Security Admin role.

Syntax

set storageArray managementInterface restOnly={true | false}

Parameters

Parameter Description

restOnly

When set to true, indicates that the RESTful interface is the only management interface allowed. This interface enforces an encrypted connection between the storage array and the management software.

When set to false, indicates that the legacy interface between the storage array and the management software is allowed. This interface is not encrypted.

Some tools that communicate directly with the legacy management interface, such as the SANtricity SMI-S Provider or OnCommand Insight (OCI), will not work unless the restOnly parameter is set to false. Contact technical support for more information.

Examples

SMcli -n Array1 -c "set storageArray managementInterface restOnly=true;"

SMcli completed successfully.

Minimum firmware level

Not applicable.