Set storage array unnamed discovery session

09/10/2024 Contributors

The set storageArray unnamedDiscoverySession command enables the storage array to participate in unnamed discovery sessions.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Syntax

set storageArray unnamedDiscoverySession=(TRUE | FALSE)

Parameter

Parameter Description

Parameter	Description
`unnamedDiscoverySession`	This parameter turns on or turns off unnamed discovery sessions. Set the parameter to `TRUE` to turn on unnamed discovery sessions. Set the parameter to `FALSE` to turn off unnamed discovery sessions.

unnamedDiscoverySession

This parameter turns on or turns off unnamed discovery sessions. Set the parameter to TRUE to turn on unnamed discovery sessions. Set the parameter to FALSE to turn off unnamed discovery sessions.

Notes

Discovery is the process where initiators determine the targets that are available. Discovery occurs at power-on/initialization and also if the bus topology changes, for example, if an extra device is added.

An unnamed discovery session is a discovery session that is established without specifying a target ID in the login request. For unnamed discovery sessions, neither the target ID nor the target portal group ID are available to the targets.

Minimum firmware level

7.10