Skip to main content
SANtricity commands

Show storage array controller health image

Contributors netapp-driley
PDFs

The show storageArray controllerHealthImage command shows details of the controller health image on the controller cache, if a controller health image is available, on storage arrays that support the controller health image.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.

Context

Note

With firmware version 8.20 the coreDump parameter is replaced with the controllerHealthImage parameter.

If the storage array does not support the controller health image feature, this command returns an error.

Syntax

show storageArray controllerHealthImage

Parameters

None.

Minimum firmware level

7.83

8.20 replaces the coreDump parameter with the controllerHealthImage parameter.