Skip to main content
SANtricity commands

Show storage array host connectivity reporting

Contributors netapp-driley

The show storageArray hostConnectivityReporting command returns the enablement status of the host connectivity reporting feature.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.

Syntax

show storageArray hostConnectivityReporting

Parameters

None.

Minimum firmware level

8.42 New command parameter.