Skip to main content
SANtricity commands

Display storage array syslog configuration

Contributors netapp-driley
PDFs

The show storageArray syslog command allows you to view the configuration of a syslog server used for storing audit logs. Configuration information includes a server ID, along with its address, protocol, and port number.

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Syntax

show storageArray syslog (allServers | id="<id>")

Parameters

Parameter Description

allServers

Displays all syslog configurations.

id

Displays the syslog configuration with the matching ID.

Examples

SMcli -n Array1 -c "show storageArray syslog allServers;"
SMcli -n Array1 -c "show storageArray syslog id=\"331998fe-3154-4489-b773-b0bb60c6b48e\";"

ID:             331998fe-3154-4489-b773-b0bb60c6b48e
Server Address: 192.168.2.1.com
Port:           514
Protocol:       udp
Components
1. Component Name: auditLog

SMcli completed successfully.

Minimum firmware level

8.42