Skip to main content
SANtricity commands

Stop check volume parity job

Contributors netapp-driley

The stop check volume parity job command stops an in-progress check volume parity job.

Supported Arrays

This command applies to any individual storage array, including the EF600 and EF300 arrays; as long as all SMcli packages are installed.


To execute this command on an EF600 and EF300 storage array, you must have the Storage Admin role.


stop check volume parity job jobId=<job_id>;


Parameter Description


The job id corresponding to the check volume parity job to stop. This value is required.

Minimum firmware level