Skip to main content
SANtricity commands

Stop storage array iSCSI session

Contributors netapp-driley

The stop storageArray iscsiSession command forces the termination of a storage array iSCSI session.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.


To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.


stop storageArray iscsiSession [SessionNumber]


Parameter Description


The identifier number of the iSCSI session. Enclose the identifier number of the iSCSI session in square brackets ([ ]).

Minimum firmware level