Synchronous mirroring terminology
-
PDF of this doc site
- System Manager
Collection of separate PDF docs
Creating your file...
Learn how the synchronous mirroring terms apply to your storage array.
Term | Description |
---|---|
Local storage array |
The local storage array is the storage array that you are acting upon. When you see Primary in the Local Role column, it indicates that the storage array contains the volume that holds the primary role in the mirror relationship. When you see Secondary in the Local Role column, it indicates that the storage array contains the volume that holds the secondary role in the mirror relationship. |
Mirrored pair |
A mirrored pair is comprised of two volumes, a primary volume and a secondary volume. |
Primary volume |
The primary volume of a mirrored pair is the source volume to be mirrored. |
Recovery point objective (RPO) |
Recovery Point Objective (RPO) represents an objective that indicates the difference considered acceptable between the primary volume and secondary volume in a mirrored pair. An RPO of zero indicates that no difference between the primary volume and secondary volume can be tolerated. An RPO greater than zero indicates that the secondary volume is less current or lags behind the primary volume. |
Remote storage array |
The remote storage array is usually designated as the secondary site, which usually holds a replica of the data in a mirroring configuration. |
Reserved capacity |
Reserved capacity is the physical allocated capacity that is used for any copy service operation and storage object. It is not directly readable by the host. |
Role change |
Role change is assigning the primary role to the secondary volume and vice versa. |
Secondary volume |
The secondary volume of a mirrored pair is usually located at a secondary site and holds a replica of the data. |
Synchronization |
Synchronization occurs at initial synchronization between the local storage array and the remote storage array. Synchronization also occurs when the primary and secondary volumes become unsynchronized after a communication interruption. When the communication link is working again, any unreplicated data is synchronized to the secondary volume's storage array. |