Skip to main content
SANtricity software
A newer release of this product is available.

What else do I need to do to configure or diagnose iSCSI?

Contributors netapp-revathid
PDFs

iSCSI sessions can occur with hosts or remote storage arrays in an asynchronous mirror relationship. The following tables list the SANtricity System Manager functions that you can use to configure and manage these iSCSI sessions.

Note

The iSCSI settings are only available if your storage array supports iSCSI.

Configure iSCSI

Action Location

Manage iSCSI settings

  1. Select Settings › System.

  2. Scroll down to iSCSI settings to view all the management functions.

Configure iSCSI ports

  1. Select Hardware.

  2. Select Show back of shelf.

  3. Select a controller.

  4. Select Configure iSCSI ports.

Set the host CHAP secret

  1. Select Settings › System.

  2. Scroll down to iSCSI settings, and then select Configure Authentication.

or

  1. Select Storage › Hosts.

  2. Select a host member.

  3. Click View/Edit Settings › Host Ports tab.

Diagnose iSCSI

Action Location

View or end iSCSI sessions

  1. Select Settings › System.

  2. Scroll down to iSCSI settings, and then select View/End iSCSI Sessions.

or

  1. Select Support › Support Center › Diagnostics tab.

  2. Select View/End iSCSI Sessions.

View iSCSI statistics

  1. Select Settings › System.

  2. Scroll down to iSCSI settings, and then select View iSCSI Statistics Packages.

or

  1. Select Support › Support Center › Diagnostics tab.

  2. Select View iSCSI Statistics Packages.