Skip to main content
SANtricity 11.8

Delete trap destinations

Contributors
PDFs

You can delete a trap destination address so that the storage array's event monitor no longer sends SNMP traps to that address.

Steps

  1. Select Settings › Alerts.

  2. Select the SNMP tab.

    The trap destination addresses appear in the table.

  3. Select a trap destination, and then click Delete in the upper right of the page.

  4. Confirm the operation, and then click Delete.

    The destination address no longer appears on the Alerts page.

Results

The deleted trap destination no longer receives SNMP traps from the storage array's event monitor.