Skip to main content
SANtricity 11.8

Take action on a Copy Volume operation

Contributors netapp-jolieg

You can view a Copy Volume operation in progress and stop, change priority, re-copy, or clear a Copy Volume operation.

Steps
  1. Select Home  View Operations in Progress.

    The Operations in Progress dialog box appears.

  2. Find the Copy Volume operation that you want to take action on, and then click the link in the Actions column to take one of the following actions.

    Read all cautionary text provided in dialogs, particularly when stopping an operation.

    Action Description

    Stop

    You can stop a Copy Volume operation while the operation has a status of In Progress, Pending, or Failed.

    When the Copy Volume is stopped, all of the mapped hosts have write access to the source volume. If data is written to the source volume, the data on the target volume no longer matches the data on the source volume.

    Change priority

    You can change the priority of a Copy Volume operation while the operation has a status of In Progress to select the rate at which a Copy Volume operation completes.

    Re-copy

    You can re-copy a volume when you have stopped a Copy Volume operation and want to start it again or when a Copy Volume operation has failed or halted. The Copy Volume operation starts over from the beginning.

    The re-copy action overwrites existing data on the target volume and fails all snapshot volumes associated with the target volume, if any exist.

    Clear

    You can remove the Copy Volume operation while the operation has a status of In Progress, Pending, or Failed.

    Note

    Be sure that you want to do this operation before selecting Clear. There is no confirmation dialog.