Skip to main content
SANtricity 11.8

Enable AutoSupport maintenance window

Contributors netapp-jolieg
PDFs

Enable the AutoSupport maintenance window to suppress automatic ticket creation on error events. Under normal operation mode, the storage array uses AutoSupport to open a case with Support if there is an issue.

Steps

  1. Select Support › Support Center › AutoSupport tab.

  2. Select Enable AutoSupport Maintenance window.

  3. Enter the email address to receive a confirmation that the maintenance window request has been processed.

    Depending on your configuration, you may be able to enter up to five email addresses. If you want to add more than one address, select Add another email to open another field.

  4. Specify the duration (in hours) to enable the maintenance window.

    The maximum supported duration is 72 hours.

  5. Click Yes.

    AutoSupport automatic ticket creation on error events is temporarily suppressed for the specified duration window.

After you finish

The maintenance window does not begin until the storage array's request is processed by the AutoSupport servers. Wait until you have received a confirmation email before performing any maintenance activities on your storage array.