Skip to main content
E-Series Systems

Configure storage array NVMe over InfiniBand connections

Contributors NetAppZacharyWambold netapp-jolieg

If your controller includes an NVMe over InfiniBand port, you can configure the IP address of each port using SANtricity System Manager.

Steps
  1. From the System Manager interface, select Hardware.

  2. If the graphic shows the drives, click Show back of shelf.

    The graphic changes to show the controllers instead of the drives.

  3. Click the controller with the NVMe over InfiniBand ports you want to configure.

    The controller's context menu appears.

  4. Select Configure NVMe over InfiniBand ports.

    Note The Configure NVMe over InfiniBand ports option appears only if System Manager detects NVMe over InfiniBand ports on the controller.

    The Configure NVMe over InfiniBand Ports dialog box opens.

  5. In the drop-down list, select the HIC port you want to configure, and then enter the IP address of the port.

  6. Click Configure.

  7. Repeat steps 5 and 6 for the other HIC ports that will be used.