SetConfig

Contributors netapp-mwallis amgrissino Download PDF of this page

You can use the SetConfig method to set the network and cluster information for the node. This method includes the same settings in a single API method that are available using both SetClusterConfig and SetNetworkConfig methods. Only the fields you want changed need to be included with this method.

Note SolidFire Enterprise SDS does not support this method. If you use this method on a SolidFire eSDS system, the method will return an error.

Parameter

CAUTION:

Changing the bond-mode on a node can cause a temporary loss of network connectivity.

This method has the following input parameters:

Name Description Type Default value Required

cluster

Cluster information that identifies how the storage node communicates with the storage cluster it is associated with.

None

No

network

Network connection types and current settings for each network interface of the node.

None

No

Return value

This method has the following return value:

Name Description Type

config

The new and current configuration for the node. This object contains:

  • cluster: Cluster information that identifies how the storage node communicates with the storage cluster it is associated with.

  • network (all interfaces): Network connection types and current settings for each network interface of the node.

JSON object

Request example

Requests for this method are similar to the following example:

{
	"method": "SetConfig",
	"params": {
		"cluster": {
			"name": "MyHostname"
		},
		"network": {
			"Bond10G": {
				"bond-mode": "ALB"
			}
		}
	}
}

Response example

The response from this method is the same as the return for the GetConfig method. All fields for the object display and updated values are seen when SetConfig is used.

New since version

9.6