network connections active show-clients
Suggest changes
PDFs
Show a count of the active connections by client
Availability: This command is available to cluster and Vserver administrators at the admin privilege level.
Description
The network connections active show-clients command displays information about client connections, including the client's IP address and the number of client connections.
|
The results of this command set are refreshed independently every 30 seconds and might not reflect the immediate state of the system. |
Parameters
- {
[-fields <fieldname>,…] -
If you specify the
-fields <fieldname>, …parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify. - |
[-instance ]} -
If you specify the
-instanceparameter, the command displays detailed information about all fields. [-node {<nodename>|local}]- Node-
Use this parameter to display information only about the connections on the node you specify.
[-vserver <vserver>]- Vserver-
This parameter is used by the system to break down the output per vserver.
[-remote-address <Remote IP>]- Remote IP Address-
Use this parameter to display information only about the connections that use the remote IP address you specify.
[-count <integer>]- Client Count-
Use this parameter to only clients with the number of active client connections you specify.
Examples
The following example displays information about active client connections:
cluster1::> network connections active show-clients
Node Vserver Name Client IP Address Count
------ -------------- ----------------- ------
node0 vs1 192.0.2.253 1
vs2 192.0.2.252 2
vs3 192.0.2.251 5
node1 vs1 192.0.2.250 1
vs2 192.0.2.252 3
vs2 customer.example.com 4