Skip to main content

system snmp init

Contributors
Suggest changes

Enables or disables SNMP traps

Availability: This command is available to cluster administrators at the admin privilege level.

Description

Initializes or disables sending of traps by the SNMP daemon from the cluster.

Parameters

[-init <integer>] - Initialize Traps

Use the value of 1 to initialize SNMP daemon to send traps or use a value of 0 to stop sending traps from the cluster. If no value is specified, this command displays the current setting of init. Traps are enabled by default.

Examples

The following command initializes SNMP daemon to send traps. +

cluster1::> system snmp init -init 1
uster1::> system snmp show
contact:
        private
location:
        NB
authtrap:
        1
init:
        1
traphosts:
        -
community:
  -   -