Skip to main content
ONTAP commands
A newer release of this product is available.

network routing-groups route show

Suggest changes
PDFs

(DEPRECATED)-Display static routes

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description

Note This command has been deprecated and may be removed from a future version of Data ONTAP. Use the "network route" command set to configure routes instead.

The network routing-groups route show command displays a group of static routes within one or more routing groups. You can view routes originating from specified servers, routes within specified routing groups, routes with specified gateways, and routes with a specified number of hops.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-vserver <vserver>] - Vserver Name

Use this parameter to display the routes within the specified vserver.

[-routing-group <text>] - Routing Group

Use this parameter to display the routes within the specified routing group.

[-destination <IP Address/Mask>] - Destination/Mask

Use this parameter to diplay the routes with the specified destination IP address.The format for this value is: address, slash ("/"), mask. The example below has 0.0.0.0/0 as a valid value for the -destination parameter.

[-gateway <IP Address>] - Gateway

Use this parameter to display the routes with the specified gateway.

[-metric <integer>] - Metric

Use this parameter to display the routes with the specified metric.

[-address-family {ipv4|ipv6|ipv6z}] - Address Family

Use this parameter to display the routes using the specified address family. Only IPv4 and IPv6 non-zoned addresses can be used for this parameter. IPv6z addresses should not be used.

Examples

The following example displays information about all routing groups.

cluster1::> network routing-groups route show
         Routing
Server   Group     Destination      Gateway          Metric
-------- --------- ---------------- ---------------- -------
node1    d192.0.2.165/24
                   0.0.0.0/0        10.61.208.1      20
node2    d192.0.2.166/24
                   0.0.0.0/0        10.61.208.1      20
2 entries were displayed.