NOTICE

This event is issued when a vol copy start is issued on a volume which is offline.

Vol copy start is issued on a restricted volume, use "vol restrict" to restrict the destination volume.

Vol copy automatically restricting destination volume %s (currently offline).

dst (STRING): The vol copy destination volume

NOTICE

This event is issued when a vol copy start operation is issued on a volume which is reverting its checksum state.

(None).

Metadata only vol copy from %s to %s.

src (STRING): The vol copy source volume
dst (STRING): The vol copy destination volume

ERROR

This event is issued when there is insufficient memory on the vol copy destination for the transfer to continue.

(None).

System is low on memory, aborting vol copy destination transfer.

(None).

ERROR

This event is issued when a vol copy start operation has to revert the checksum state of the destination volume because the source and destination volumes have differing checksum states.

No corrective action required.

A vol copy transfer to destination volume %s has found that the source and destination volumes have differing checksum states. Data ONTAP is aborting the transfer and reverting the checksum state for the destination volume. After Data ONTAP displays a message showing the revert is complete, you will need to retry the operation. You can use the "vol status -c" command to see the progress of the reversion.

dst (STRING): The vol copy destination volume

ERROR

This event is issued when a vol copy start operation is issued on a volume which is reverting its checksum state.

(None).

Aborting vol copy transfer to volume %s because it is reverting its checksum state.

dst (STRING): The vol copy destination volume