vnvram.dma events
Contributors
Suggest changes
PDFs
vnvram.dma.long.wait
- Severity
-
ALERT
- Description
-
This message occurs when a vNVRAM flush operation on an ONTAP-v system is taking too much time. This can indicate back-end storage issues or an internal error. The system might also reboot.
- Corrective Action
-
If the problem persists, check for back-end storage issues with the system disk.
- Syslog Message
-
vNVRAM flush taking over %d seconds.
- Parameters
-
vnvr_wait_sec (INT): Time in seconds for the vNVRAM flush operation.