Skip to main content
ONTAP FLI

FLI zoning requirements

Contributors

A standard migration scenario using FLI requires four distinct zones. You should include specific ports in each zone.

  • Zone 1: Source storage to destination storage (production fabric A)

    Zone 1 should contain all destination storage initiators on all the nodes and all the source storage target ports in fabric A. Zone members include:

    • ONTAP — Node1 — 0a

    • ONTAP — Node2 — 0a

    • AMS2100 — Ctrl0 — 0a

    • AMS2100 — Ctrl1 — 1a

  • Zone 2: Source storage to destination storage (production fabric B)

    Zone 2 should contain all destination storage initiator ports on all the nodes and all the source storage target ports in fabric B. Zone 2 members include:

    • ONTAP — Node1 — 0b

    • ONTAP — Node2 — 0b

    • AMS2100 — Ctrl0 — 0e

    • AMS2100 — Ctrl1 — 1e

  • Zone 3: Host to destination storage (production fabric A)

    Zone 3 should contain the host bus adapter (HBA) port 1 and the destination controller ports in production Fabric A. Zone 3 members include:

    • ONTAP — lif1

    • ONTAP — lif3

    • Host — HBA0

  • Zone 4: Host to destination storage (production fabric B)

    Zone 4 should contain the HBA port 2 and the destination controller ports in production fabric B. Zone 4 members include:

    • ONTAP — lif2

    • ONTAP — lif4

    • Host — HBA1