Skip to main content
SAN hosts and cloud clients

Solaris Host Utilities 6.2 command reference

Contributors netapp-ranuk
PDFs

You can use the Solaris Host Utilities 6.2 sample command reference for an end-to-end validation of the NetApp storage configuration using the host utilities tool.

List all host initiators mapped to host

You can retrieve a list of all host initiators mapped to a host.

# sanlun fcp show adapter -v

Example output

adapter name:      qlc3
WWPN:              21000024ff17a301
WWNN:              20000024ff17a301
driver name:       qlc
model:             7335902
model description: 7115462, Oracle Storage Dual-Port 32 Gb Fibre Channel PCIe HBA
serial number:     463916R+1720333838
hardware version:  Not Available
driver version:    210226-5.10
firmware version:  8.08.04
Number of ports:   1 of 2
port type:         Fabric
port state:        Operational
supported speed:   8 GBit/sec, 16 GBit/sec, 32 GBit/sec
negotiated speed:  32 GBit/sec
OS device name:    /dev/cfg/c7

adapter name:      qlc2
WWPN:              21000024ff17a300
WWNN:              20000024ff17a300
driver name:       qlc
model:             7335902
model description: 7115462, Oracle Storage Dual-Port 32 Gb Fibre Channel PCIe HBA
serial number:     463916R+1720333838
hardware version:  Not Available
driver version:    210226-5.10
firmware version:  8.08.04
Number of ports:   2 of 2
port type:         Fabric
port state:        Operational
supported speed:   8 GBit/sec, 16 GBit/sec, 32 GBit/sec
negotiated speed:  16 GBit/sec
OS device name:    /dev/cfg/c6

List all LUNs mapped to host

You can retrieve a list of all LUNs mapped to a host.

# sanlun lun show -p -v all

Example output

                    ONTAP Path: data_vserver:/vol1/lun1
                           LUN: 1
                      LUN Size: 10g
                   Host Device: /dev/rdsk/c0t600A0980383044485A3F4E694E4F775Ad0s2
                          Mode: C
            Multipath Provider: Sun Microsystems
              Multipath Policy: Native

List all LUNs mapped to host from a given SVM/ List all attributes of a given LUN mapped to host

You can retrieve a list of all LUNs mapped to a host from a certain SVM.

# sanlun lun show -p -v sanboot_unix`

Example output

ONTAP Path: sanboot_unix:/vol/sol_boot/sanboot_lun
                           LUN: 0
                      LUN Size: 180.0g

List ONTAP LUN attributes by host device filename

You can retrieve a list of all ONTAP LUN attributes by specifying a host device filename.

# sanlun lun show all

Example output

controller(7mode/E-Series)/                                         device
vserver(cDOT/FlashRay)       lun-pathname                           filename
---------------------------------------------------------------------------------------------------------------
sanboot_unix                 /vol/sol_193_boot/chatsol_193_sanboot /dev/rdsk/c0t600A098038304437522B4E694E4A3043d0s2

host adapter    protocol lun size   product
---------------------------------------------
qlc3            FCP      180.0g     cDOT