Skip to main content
ONTAP Select

Hyper-V storage requirements for ONTAP Select

Contributors netapp-pcarriga

When you configure ONTAP Select on a Hyper-V hypervisor, ONTAP Select stores the virtual machine (VM) and the virtual disks on a local volume on the Hyper-V host.

Basic requirements and restrictions

The following configuration requirements and restrictions apply to ONTAP Select storage pools on a Hyper-V host:

  • The storage pool must be an NTFS or ReFS volume with a drive letter assigned. The Deploy utility identifies the storage pool by its drive letter.

  • Cluster Shared Volumes are not supported as storage pools.

  • Network file shares and remote UNC paths, such as SMB 3.0, are not supported as storage pools.

  • ONTAP Select does not discover a volume that is mounted only to a folder path because the volume has no drive letter.

  • ONTAP Select can use a LUN on an external storage array using FC, FCoE, or iSCSI if the Hyper-V host formats the LUN as NTFS or ReFS and assigns a drive letter. ONTAP Select treats such a volume as local host storage. The ONTAP Select vNAS model used with ESXi does not apply to Hyper-V.

  • A Storage Spaces virtual disk can hold a storage pool if it is formatted as NTFS or ReFS with a drive letter assigned. However, software RAID cannot use physical disks that are members of a Storage Spaces pool.

  • A Hyper-V configuration does not recognize thinly provisioned storage. ONTAP Select uses the capacity that Windows reports for the volume.

Best practices

You should follow these best practices:

  • Define dedicated network adapters, bandwidth, and virtual switch configurations for the ONTAP Select networks. Keep external storage traffic, such as iSCSI, on separate adapters.

  • Dedicate the storage pool volume to ONTAP Select. Do not place another Hyper-V VM or Windows workload on the same volume, and do not use the Windows boot volume as a storage pool.

  • Size the volume so that ONTAP Select does not consume its entire capacity.

  • Configure Windows MPIO for external storage arrays so that LUNs are presented over redundant paths.