Request doc changesEdit this pageLearn how to contribute
ON THIS PAGE
    • Product and Solutions
    • Support and Training
    • Cloud Central
    • Community
    • Blog
    • Customer Stories
    • Contact
    Menu bars
    netapp-mark netapp-logo
    English globe
    • English
    • 日本語
    • 한국어
    • 简体中文
    • 繁體中文
    • Deutsch
    • Español
    • Français
    Available PDFs
    • PDF of this doc site
      • Provision NAS storage
        • NFS configuration
          • NFS configuration workflow
          • Create a new NFS-enabled SVM
          • Configure NFS access to an existing SVM
          • Add an NFS volume to an NFS-enabled SVM
        • NFS configuration for ESXi using VSC
          • NFS Client Configuration for ESXi workflow
            • Configure the ESXi host
        • SMB/CIFS and NFS multiprotocol configuration
          • Multiprotocol configuration workflow
            • Decide where to provision the new volume
        • SMB/CIFS configuration
          • SMB/CIFS configuration workflow
          • Create a new CIFS-enabled SVM
          • Configure SMB/CIFS access to an existing SVM
          • Ad a CIFS volume to a CIFS-enabled SVM
      • Provision SAN storage
        • FC configuration for ESXi using VSC
          • FC configuration workflow
            • Decide where to provision the volume
        • FC configuration for Red Hat Enterprise Linux
          • FC configuration and provisioning workflow
            • Decide where to provision the volume
        • FC configuration for Windows
          • FC configuration workflow
            • Decide where to provision the volume
        • iSCSI configuration for ESXi using VSC
          • iSCSI configuration workflow
            • Decide where to provision the volume
        • iSCSI configuration for Red Hat Enterprise Linux
          • iSCSI configuration and provisioning workflow
            • Decide where to provision the volume
        • iSCSI configuration for Windows
          • iSCSI configuration and provisioning workflow
            • Decide where to provision the volume
      • Data protection and disaster recovery
        • Cluster and SVM peering configuration
          • Cluster and SVM peering workflow
            • Configure peer relationships (Beginning with ONTAP 9.3)
            • Configure peer relationships (ONTAP 9.2 and earlier)
        • Volume disaster recovery
          • Volume disaster recovery workflow
            • Activate the destination volume
            • Reactivate the source volume
        • Volume disaster recovery preparation
          • Volume disaster recovery preparation workflow
        • Volume backup using SnapVault
          • SnapVault backup configuration workflow
        • Volume restore management using SnapVault
          • Volume restore workflow
      • Cluster administration
        • Cluster administration
          • Cluster expansion administration
            • Cluster expansion workflow
              • Verify the cluster is ready for expansion
              • Prepare the cluster for expansion
              • Install the new nodes
              • Complete the expansion
        • Volume move management
          • Volume move workflow
        • SNMP configuration
          • SNMP configuration workflow
      • Cluster management using System Manager 9.6 and 9.7
        • Cluster management using System Manager 9.6 and 9.7
          • Set up the cluster by using ONTAP System Manager
            • Set up a cluster by using the template file
          • Set up the cluster
          • Set up physical storage
          • Create SVMs
          • Manage clusters
            • MetroCluster switchover and switchback
          • Applications
          • Update clusters
          • Storage tiers
          • Disks
          • SVM Dashboard window
          • Volumes
          • LUNs
          • CIFS protocol
          • Set up NVMe
          • Manage QoS policy groups
          • Local windows group
          • Mirror relationships
          • Vault relationships
          • Mirror and vault relationships 
    Collection of separate PDF docs

    Creating your file...

    This may take a few minutes. Thanks for your patience.
    Your file is ready
    All ONTAP product documentation
    • System Manager Classic docs
    • Provision NAS storage
      • NFS configuration
        • Overview
        • NFS configuration workflow
          • Create an aggregate
          • Decide where to provision the new volume
        • Create a new NFS-enabled SVM
          • Create a new SVM with an NFS volume and export
          • Open the export policy of the SVM root volume (Create a new NFS-enabled SVM)
          • Configure LDAP (Create a new NFS-enabled SVM)
          • Verify NFS access from a UNIX administration host
          • Configure and verifying NFS client access (Create a new NFS-enabled SVM)
        • Configure NFS access to an existing SVM
          • Add NFS access to an existing SVM
          • Open the export policy of the SVM root volume(Configure NFS access to an existing SVM)
          • Configure LDAP (Configure NFS access to an existing SVM )
          • Verify NFS access from a UNIX administration host
          • Configure and verify NFS client access (Configure NFS access to an existing SVM)
        • Add an NFS volume to an NFS-enabled SVM
          • Create and configure a volume
          • Create an export policy for the volume
          • Verify NFS access from a UNIX administration host
          • Configure and verify NFS client access (Adding an NFS volume to an NFS-enabled SVM)
      • NFS configuration for ESXi using VSC
        • Overview
        • NFS Client Configuration for ESXi workflow
          • Verify that the configuration is supported
          • Complete the NFS client configuration worksheet
          • Install
          • Add the storage cluster to VSC
          • Configure your network for best performance
          • Configure the ESXi host
            • Configure host ports and vSwitches
            • Configure the ESXi host best practice settings
          • Create an aggregate
          • Decide where to provision the new volume
          • Create a new NFS-enabled SVM
          • Add NFS access to an existing SVM
          • Verify that NFS is enabled on an existing SVM
          • Provision a datastore and create its containing volume
          • Verify NFS access from an ESXi host
          • Deploy the NFS Plug-in for VMware VAAI
          • Mount datastores on hosts
      • SMB/CIFS and NFS multiprotocol configuration
        • Overview
        • Multiprotocol configuration workflow
          • Create an aggregate
          • Decide where to provision the new volume
            • Create a basic SVM
            • Add CIFS and NFS access to an existing SVM
            • Open the export policy of the SVM root volume (Creating a new NFS-enabled SVM)
            • Map the SMB server on the DNS server
            • Configure LDAP (Create a new NFS-enabled SVM)
            • Map UNIX and Windows user names
          • Create and configure a volume
          • Create a share and setting its permissions
          • Create an export policy for the volume
          • Verify SMB client access
          • Verify NFS access from a UNIX administration host
          • Configure and verify CIFS and NFS client access
      • SMB/CIFS configuration
        • Overview
        • SMB/CIFS configuration workflow
          • Create an aggregate
          • Decide where to provision the new volume
        • Create a new CIFS-enabled SVM
          • Create a new SVM with a CIFS volume and share
          • Map the SMB server on the DNS server
          • Verify SMB client access
          • Configure and verify CIFS client access
        • Configure SMB/CIFS access to an existing SVM
          • Add CIFS access to an existing SVM
          • Map the SMB server on the DNS server
          • Verify SMB client access
          • Configure and verify CIFS client access
        • Ad a CIFS volume to a CIFS-enabled SVM
          • Create and configure a volume
          • Create a share and set its permissions
          • Verify SMB client access
          • Configure and verify CIFS client access
    • Provision SAN storage
      • FC configuration for ESXi using VSC
        • Overview
        • FC configuration workflow
          • Verify that the FC configuration is supported
          • Complete the FC configuration worksheet
          • Install Virtual Storage Console
          • Add the storage cluster or SVM to VSC for VMware vSphere
          • Update the HBA driver, firmware, and BIOS
          • Configure the ESXi host best practice settings
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the FC service is running on an existing SVM
            • Configure FC on an existing SVM
            • Create a new SVM
          • Zone the FC switches by the host and LIF WWPNs
          • Provision a datastore and create its containing LUN and volume
          • Verify that the host can write to and read from the LUN
      • FC configuration for Red Hat Enterprise Linux
        • Overview
        • FC configuration and provisioning workflow
          • Verify that the FC configuration is supported
          • Complete the FC configuration worksheet
          • Install the HBA utility from the HBA vendor
          • Update the HBA driver, firmware, and BIOS
          • Install Linux Unified Host Utilities and optimizing I/O performance
          • Record the WWPN for each host FC port
          • Configure DM-Multipath
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the FC service is running on an existing SVM
            • Create a LUN
            • Configure FC on an existing SVM
            • Create a new SVM
          • Zone the FC switches by the host and LIF WWPNs
          • Discover new SCSI devices (LUNs) and multipath devices
          • Configure logical volumes on multipath devices and create a file system
          • Verify that the host can write to and read from a multipath device
      • FC configuration for Windows
        • Overview
        • FC configuration workflow
          • Verify that the FC configuration is supported
          • Complete the FC configuration worksheet
          • Install the HBA utility from the HBA vendor
          • Update the HBA driver, firmware, and BIOS
          • Record the WWPN for each host FC port
          • Install Windows Unified Host Utilities
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the FC service is running on an existing SVM
            • Create a LUN
            • Configure FC on an existing SVM
            • Create a new SVM
          • Zone the FC switches by the host and LIF WWPNs
          • Discover new disks
          • Initialize and formatting the LUN
          • Verify that the host can write to and read from the LUN
      • iSCSI configuration for ESXi using VSC
        • Overview
        • iSCSI configuration workflow
          • Verify that the iSCSI configuration is supported
          • Complete the iSCSI configuration worksheet
          • Install Virtual Storage Console
          • Add the storage cluster or SVM to VSC for VMware vSphere
          • Configure your network for best performance
          • Configure host iSCSI ports and vSwitches
          • Enable the iSCSI software adapter
          • Bind iSCSI ports to the iSCSI software adapter
          • Configure the ESXi host best practice settings
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the iSCSI service is running on an existing SVM
            • Configure iSCSI on an existing SVM
            • Create a new SVM
          • Test iSCSI paths from the host to the storage cluster
          • Provision a datastore and creating its containing LUN and volume
          • Verify that the host can write to and read from the LUN
      • iSCSI configuration for Red Hat Enterprise Linux
        • Overview
        • iSCSI configuration and provisioning workflow
          • Verify that the iSCSI configuration is supported
          • Complete the iSCSI configuration worksheet
          • Install Linux Unified Host Utilities and optimizing I/O performance
          • Record the iSCSI node name
          • Set the iSCSI replacement timeout value
          • Start the iSCSI service
          • Configure DM-Multipath
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the iSCSI service is running on an existing SVM
            • Create a LUN
            • Configure iSCSI on an existing SVM
            • Create a new SVM
          • Start the iSCSI sessions with the target
          • Discover new SCSI devices (LUNs) and multipath devices
          • Configure logical volumes on multipath devices and creating a file system
          • Verify that the host can write to and read from a multipath device
      • iSCSI configuration for Windows
        • Overview
        • iSCSI configuration and provisioning workflow
          • Verify that the iSCSI configuration is supported
          • Complete the iSCSI configuration worksheet
          • Record the iSCSI initiator node name
          • Install Windows Unified Host Utilities
          • Create an aggregate
          • Decide where to provision the volume
            • Verify that the iSCSI service is running on an existing SVM
            • Create a LUN
            • Configure iSCSI on an existing SVM
            • Create a new SVM
          • Start iSCSI sessions with the target
          • Discover new disks
          • Initialize and formatting the LUN
          • Verify that the host can write to and read from the LUN
    • Data protection and disaster recovery
      • Cluster and SVM peering configuration
        • Overview
        • Prerequisites for cluster peering
        • Cluster and SVM peering workflow
          • Prepare for cluster peering
          • Configure peer relationships (Beginning with ONTAP 9.3)
            • Create intercluster LIFs(Beginning with ONTAP 9.3)
            • Create a cluster peer relationship (Beginning with ONTAP 9.3)
            • Create SVM peer relationship
          • Configure peer relationships (ONTAP 9.2 and earlier)
            • Create intercluster interfaces on all nodes (ONTAP 9.2 or earlier)
            • Create a cluster peer relationship (ONTAP 9.2 or earlier)
      • Volume disaster recovery
        • Overview
        • Volume disaster recovery workflow
          • Activate the destination volume
            • Verify the status of the source volume
            • Break the SnapMirror relationship
            • Verify the destination volume status
          • Configure the destination volume for data access
          • Reactivate the source volume
            • Resynchronize the source volume
            • Update the source volume
            • Reactivate the source volume
      • Volume disaster recovery preparation
        • Overview
        • Volume disaster recovery preparation workflow
          • Verify the cluster peer relationship and SVM peer relationship
          • Create the SnapMirror relationship (Beginning with ONTAP 9.3)
          • Create the SnapMirror relationship (ONTAP 9.2 or earlier)
          • Set up the destination SVM for data access
          • Monitor the status of SnapMirror data transfers
      • Volume backup using SnapVault
        • Overview
        • SnapVault backup configuration workflow
          • Verify cluster peer relationship and SVM peer relationship
          • Create a SnapVault relationship (Beginning with ONTAP 9.3)
          • Create the SnapVault relationship (ONTAP 9.2 or earlier)
          • Monitor the SnapVault relationship
      • Volume restore management using SnapVault
        • Overview
        • Volume restore workflow
          • Identify the SnapVault backup destination volume
          • Restore data from a SnapVault backup
          • Verify the restore operation
    • Cluster administration
      • Cluster administration
        • Cluster expansion administration
          • Overview
          • Cluster expansion workflow
            • Verify the cluster is ready for expansion
              • Verify the planned configuration
              • Gather the required network information
              • Add or replace switches
            • Prepare the cluster for expansion
              • Add node-locked licenses
              • Verify the health of the system
              • Back up the cluster configuration
              • Generate an AutoSupport message about starting expansion
            • Install the new nodes
              • Install the controllers
              • Configure node-management LIFs
              • Upgrade or downgrade the nodes
              • Ensure hardware-level HA is enabled
              • Add nodes to a cluster using System Manager
              • Join nodes to the cluster using the CLI
            • Complete the expansion
              • Configure the node details in System Manager
              • Configure AutoSupport on the new nodes
              • Configure the Service Processor network
              • Validate the configuration of the expanded cluster
              • Generate an AutoSupport message about completing expansion
              • Update LUN paths for the new nodes
      • Volume move management
        • Overview
        • Volume move workflow
          • Plan the method and timing of a volume move
          • Move a volume using System Manager
          • Verify LUN reporting nodes after moving a volume
          • Update LUN reporting nodes after moving a volume
          • Update NDMP backup after moving a volume
      • SNMP configuration
        • Overview
        • SNMP configuration workflow
          • Verify that SNMP is enabled
          • Add an SNMP community
          • Add an SNMPv3 security user
          • Add an SNMP traphost
          • Test SNMP traps
          • Test SNMP polling
    • Cluster management using System Manager 9.6 and 9.7
      • Cluster management using System Manager 9.6 and 9.7
        • Understand System Manager
        • Set up the cluster by using ONTAP System Manager
          • Set up a cluster by using the template file
            • Create a cluster
            • Set up a network
            • Set up a support page
            • Review storage recommendations
            • Create an SVM
        • Access a cluster by using the ONTAP System Manager browser-based graphic interface
        • Configure System Manager options
        • View ONTAP System Manager log files
        • Set up the cluster
          • Set up the cluster
          • Add licenses
          • Setting the time zone for a cluster
          • Monitor HA pairs
        • Set up the network
        • Set up physical storage
          • Assigning disks to nodes
          • Zeroing spare disks
          • Provisioning storage through aggregates
        • Create SVMs
          • Configure CIFS and NFS protocols on SVMs
          • Configure iSCSI protocol on SVMs
          • Configure FC protocol and FCoE protocol on SVMs
          • Configure NVMe protocol on SVMs
          • Delegating administration to SVM administrators
          • Create FlexVol volumes
          • Create SnapLock volumes
        • Set up SAML authentication
        • Set up peering
        • Manage clusters
          • Dashboard window
          • MetroCluster switchover and switchback
            • MetroCluster switchover and switchback workflow
            • Preparing for switchover and switchback operations
            • Performing a negotiated switchover
            • Performing a unplanned switchover
            • Performing a switchback
            • MetroCluster Switchover and Switchback Operations window
        • Applications
          • Provisioning a basic template
          • Storage service definitions
          • Add Microsoft SQL Server over SAN to System Manager
          • Application provisioning settings
          • Edit an application
          • Delete an application
          • Applications window
        • Configuration update
        • Service Processors
        • Cluster peers
        • High availability
        • Licenses
        • Cluster Expansion
        • Update clusters
          • Update clusters in a non MetroCluster configuration
          • Update clusters in a MetroCluster configuration
          • Obtaining ONTAP software images
          • Update single-node clusters
          • Update a cluster nondisruptively
          • Cluster Update window
        • Date and time settings of a cluster
        • SNMP
        • LDAP
        • Users
        • Roles
        • Manage the network
        • IPspaces
        • Broadcast domains
        • Subnets
        • Network interfaces
        • Ethernet ports
        • FC/FCoE and NVMe adapters
        • Storage tiers
          • Edit aggregates
          • Delete aggregates
          • Change the RAID configuration when creating an aggregate
          • Provisioning cache by adding SSDs
          • Add capacity disks
          • Change the RAID group when adding capacity disks
          • Moving FlexVol volumes
          • Mirroring aggregates
          • View aggregate information
          • Installing a CA certificate if you use StorageGRID
          • How you can use effective ONTAP disk type for mixing HDDs
          • What compatible spare disks are
          • How System Manager works with hot spares
          • Rules for displaying disk types and disk RPM
          • Storage recommendations for creating aggregates
          • Storage Tiers window
        • Configure and managing cloud tiers
        • Aggregates
        • Storage pools
        • Reassigning disks to nodes
        • Disks
          • View disk information
          • How ONTAP reports disk types
          • Determine when it is safe to remove a multi-disk carrier
          • Disks window
        • Array LUNs
        • Nodes
        • Hardware Cache
        • Events
        • System alerts
        • AutoSupport notifications
        • Jobs
        • Flash Pool statistics
        • SVM Dashboard window
          • Monitor SVMs
          • Edit SVM settings
          • Delete SVMs
          • Start SVMs
          • Stop SVMs
          • Manage SVMs
          • Tracing file access to diagnose access errors on SVMs
          • About SVMs
          • About ONTAP name service switch configuration
          • Storage Virtual Machines window
          • Trace File Access window
        • Volumes
          • Edit volume properties
          • Edit data protection volumes
          • Delete volumes
          • Create FlexClone volumes
          • Create FlexClone files
          • Splitting a FlexClone volume from its parent volume
          • View the FlexClone volume hierarchy
          • Change the status of a volume
          • View the list of saved Snapshot copies
          • Create Snapshot copies outside a defined schedule
          • Setting the Snapshot copy reserve
          • Hiding the Snapshot copy directory
          • Scheduling automatic creation of Snapshot copies
          • Restore a volume from a Snapshot copy
          • Extend the expiry date of Snapshot copies
          • Rename Snapshot copies
          • Delete Snapshot copies
          • Resize volumes
          • Enable storage efficiency on a volume
          • Change the deduplication schedule
          • Run deduplication operations
          • Moving FlexVol volumes between aggregates or nodes
          • Assigning volumes to Storage QoS
          • Create a mirror relationship from a source SVM
          • Create a vault relationship from a source SVM
          • Create a mirror and vault relationship from a source SVM
          • Create an NFS datastore for VMware
          • Change the tiering policy of a volume
          • Create FlexGroup volumes
          • View FlexGroup volume information
          • Edit FlexGroup volumes
          • Specifying advanced options for a FlexGroup volume
          • Resize FlexGroup volumes
          • Change the status of a FlexGroup volume
          • Delete FlexGroup volumes
          • Create FlexCache volumes
          • View FlexCache volume information
          • Edit FlexCache volumes
          • Specifying advanced options for a FlexCache volume
          • Resize FlexCache volumes
          • Change the status of a FlexCache volume
          • Delete FlexCache volumes
          • How volume guarantees work for FlexVol volumes
          • Using space reservations with FlexVol volumes
          • Options for resizing volumes
          • Volumes window
        • Junction Path
        • Shares
        • LUNs
          • Create FC SAN optimized LUNs
          • Application-specific LUN settings
          • Create LUNs
          • Delete LUNs
          • Manage initiator groups
          • Create portsets
          • Cloning LUNs
          • Edit LUNs
          • Bringing LUNs online
          • Take LUNs offline
          • Moving LUNs
          • Assigning LUNs to storage QoS
          • Edit initiator groups
          • Edit initiators
          • View LUN information
          • View initiator groups
          • Guidelines for working with FlexVol volumes that contain LUNs
          • Understand space reservations for LUNs
          • Guidelines for using LUN multiprotocol type
          • LUNs window
        • Qtrees
        • Quotas
        • CIFS protocol
          • Add home directory paths
          • Reset CIFS domain controllers
          • Update the CIFS group policy configuration
          • Set up BranchCache
          • Add preferred domain controllers
          • View CIFS domain information
          • CIFS window
        • NFS protocol
        • Set up NVMe
          • Create an NVMe namespace
          • Edit an NVMe namespace
          • Cloning an NVMe namespace
          • Start and stopping the NVMe service
          • What an NVMe subsystem is
        • iSCSI protocol
        • FC/FCoE protocol
        • Export policies
        • Efficiency policies
        • Manage QoS policy groups
          • Rules for assigning storage objects to policy groups
        • NIS services
        • LDAP client services
        • LDAP configuration services
        • Kerberos realm services
        • DNS/DDNS Services
        • SVM users
        • UNIX
        • Local windows group
          • Manage local Windows groups
        • Name mapping
        • Mirror relationships
          • Manage mirror relationships
          • Break SnapMirror relationships
          • Reverse resynchronizing mirror relationships
          • Abort a mirror transfer
          • Restore a volume in a mirror relationship
        • Vault relationships
          • Manage vault relationships
          • Abort a Snapshot copy transfer
          • Restore a volume in a vault relationship
        • Mirror and vault relationships
          • Manage mirror and vault relationships
          • Abort mirror and vault relationships
          • Restore a volume in a mirror and vault relationship
        • Protection window
        • SVM relationships
        • Manage protection policies
        • Manage Snapshot policies
        • Manage schedules
    • ONTAP docs
    • Legal Notices
    • docs.netapp.com
    • ONTAP
    • System Manager Classic

    Trademark

    08/20/2021 Contributors NetAppZacharyWambold

    NETAPP, the NETAPP logo, and the marks listed on the NetApp Trademarks page are trademarks of NetApp, Inc. Other company and product names may be trademarks of their respective owners.

    https://www.netapp.com/company/legal/trademarks/

    • © 2023 NetApp, Inc.
    • Terms of Use
    • Privacy Policy
    • Cookie Policy
    • Cookie Settings
    • Send feedback about this page
    • blog blog@
    • community community@
    • twitter twitter@
    • facebook facebook@
    • linkedin linkedin@
    • youtube youtube@
    • slideshare slideshare@