Network requirements for Cisco Nexus 9332D-GX2B switches
Suggest changes
PDFs
For Cisco Nexus 9332D-GX2B switch installation and maintenance, be sure to review cabling and network requirements.
Network requirements
You need the following network information for all switch configurations.
-
IP subnet for management network traffic
-
Host names and IP addresses for each of the storage system controllers and all applicable switches
-
Most storage system controllers are managed through the e0M interface by connecting to the Ethernet service port (wrench icon).
-
Refer to the Hardware Universe for the latest information. See What additional information do I need to install my equipment that is not in HWU? for more information about switch installation requirements.
Cabling requirements
-
You have the appropriate number and type of cables and cable connectors for your switches. See the Hardware Universe.
-
Depending on the type of switch you are initially configuring, you need to connect to the switch console port with the included console cable.