Upgrade by using aggregate relocation
Verify the upgrade hardware
Contributors
Suggest changes
-
PDF of this doc site
-
Upgrade by using aggregate relocation
-
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
Before starting the upgrade, verify that you have the correct hardware for your upgrade. Depending on your upgrade, for each HA pair that you are upgrading, you must have two controller modules or two controller modules and two NVRAM modules. If there are parts missing, contact technical support or your NetApp sales representative for assistance.
| If you are upgrading … | You must have … |
|---|---|
AFF A220 configured as an ASA to ASA A150 |
Two controller modules |
AFF A220, AFF A200, or AFF C190 to AFF A150 |
Two controller modules |
FAS2620 or FAS2720 to FAS2820 |
Two controller modules |
AFF A700 configured as an ASA to ASA A900 |
Two controller and two NVRAM modules |
AFF A700 to AFF A900 |
Two controller and two NVRAM modules |
FAS9000 to FAS9500 |
Two controller and two NVRAM modules |