Worksheet: Information to record before moving NAS data LIFs to node4
Suggest changes
-
PDF of this doc site
-
Upgrade by using ARL
- Use "system controller replace" commands to upgrade controller models in the same chassis
-
Upgrade by using ARL
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
To help verify that you have the correct configuration after moving SAN LIFs from node3 to node4, you can use the following worksheet to record the adapter
and switch-port
information for each LIF.
Record the LIF adapter
information from the network interface show -data-protocol fc*
command output and the switch-port
information from the fcp adapter show -fields switch-port,fc-wwpn
command output for node3.
After you complete the migration to node4, record the LIF adapter
and switch-port
information for the LIFs on node4 and verify that each LIF is still connected to the same switch-port
.
Node3 | Node4 | ||||
---|---|---|---|---|---|
LIF |
|
|
LIF |
|
|