Skip to main content
Install and maintain

Chassis replacement workflow - ASA A20, ASA A30, and ASA A50

Contributors netapp-jsnyder netapp-lisa
PDFs

Get started with replacing the chassis of your ASA A20, ASA A30, or ASA A50 storage system by reviewing the replacement requirements, shutting down the controllers, replacing the chassis, and verifying system operations.

OneReview the chassis replace requirements

Review the requirements to replace the chassis.

TwoShut down the controllers

Shut down the controllers so you can perform maintenance on the chassis.

ThreeReplace the chassis

Replace the chassis by moving the drives and any drive blanks, controllers (with the power supplies), and bezel from the impaired chassis to the new chassis, and swapping out the impaired chassis with the new chassis of the same model as the impaired chassis.

FourComplete chassis replacement

Verify the HA state of the chassis and return the failed part to NetApp.