Skip to main content
Install and maintain

Chassis replacement workflow - ASA C30

Contributors netapp-jsnyder
PDFs

Replacing the chassis in your ASA C30 storage system consists of reviewing the replacement requirements, shutting down the controllers, replacing the chassis, and verifying system operations.

OneReview the chassis replace requirements

Review the requirements to replace the chassis.

TwoShut down the controllers

Shut down the controllers so you can perform maintenance on the chassis.

ThreeReplace the chassis

Replace the chassis by moving the drives and any drive blanks, controllers (with the power supplies), and bezel from the impaired chassis to the new chassis, and swapping out the impaired chassis with the new chassis of the same model as the impaired chassis.

FourComplete chassis replacement

Verify the HA state of the chassis and return the failed part to NetApp.