View routing information for the ONTAP network
Contributors
Suggest changes
PDFs
You can display information about routes within an SVM.
Step
Depending on the type of routing information that you want to view, enter the applicable command:
To view information about… |
Enter… |
|---|---|
Static routes, per SVM |
|
LIFs on each route, per SVM |
|
You can display detailed information for each route by specifying the -instance parameter. The following command displays the static routes within the SVMs in cluster- 1:
network route show
Vserver Destination Gateway Metric
------------------- --------------- --------------- ------
Cluster
0.0.0.0/0 10.63.0.1 10
cluster-1
0.0.0.0/0 198.51.9.1 10
vs1
0.0.0.0/0 192.0.2.1 20
vs3
0.0.0.0/0 192.0.2.1 20
The following command displays the association of static routes and logical interfaces (LIFs) within all SVMs in cluster-1:
network route show-lifs
Vserver: Cluster
Destination Gateway Logical Interfaces
---------------------- ---------------------- -------------------
0.0.0.0/0 10.63.0.1 -
Vserver: cluster-1
Destination Gateway Logical Interfaces
---------------------- ---------------------- -------------------
0.0.0.0/0 198.51.9.1 cluster_mgmt,
cluster-1_mgmt1,
Vserver: vs1
Destination Gateway Logical Interfaces
---------------------- ---------------------- -------------------
0.0.0.0/0 192.0.2.1 data1_1, data1_2
Vserver: vs3
Destination Gateway Logical Interfaces
---------------------- ---------------------- -------------------
0.0.0.0/0 192.0.2.1 data2_1, data2_2
Learn more about network route show and network route show-lifs in the ONTAP command reference.