Skip to main content
SnapCenter Plug-in for VMware vSphere 4.5
A newer release of this product is available.

Deployment planning and requirements

Contributors

You should be aware of the deployment requirements before you deploy the virtual appliance. The deployment requirements are listed in the following four tables.

Host requirements

Before you begin deployment of SnapCenter Plug-in for VMware vSphere, you should be familiar with the host requirements.

  • You must deploy the SnapCenter VMware plug-in as a Linux VM.

    The SnapCenter VMware plug-in is deployed as a Linux VM regardless of whether you use the plug-in to protect data on Windows systems or Linux systems.

  • You should deploy the SnapCenter VMware plug-in on the vCenter Server.

    Backup schedules are executed in the time zone in which the SnapCenter VMware plug-in is deployed. vCenter reports data in the time zone in which the vCenter is located. Therefore, if the SnapCenter VMware plug-in and vCenter are in different time zones, data in the SnapCenter VMware plug-in Dashboard might not be the same as the data in the reports.

  • You must not deploy the SnapCenter VMware plug-in in a folder that has a name with special characters.

    The folder name should not contain the following special characters: $!@#%^&()_+{}';.,*?"<>|

  • You must deploy and register a separate, unique instance of the SnapCenter VMware plug-in for each vCenter Server.

    • Each vCenter Server, whether or not it is in Linked Mode, must be paired with a separate instance of the SnapCenter VMware plug-in.

    • Each instance of the SnapCenter VMware plug-in must be deployed as a separate Linux VM.

      For example, if you want to perform backups from six different instances of the vCenter Server, then you must deploy the SnapCenter VMware plug-in on six hosts and each vCenter Server must be paired with a unique instance of the SnapCenter VMware plug-in.

  • The SnapCenter VMware plug-in provides limited support of shared PCI or PCIe devices (for example, NVIDIA Grid GPU) due to a limitation of the virtual machines in supporting Storage vMotion. For more information, see the vendor's document Deployment Guide for VMware.

    • What is supported:

      Creating resource groups

      Creating backups without VM consistency

      Restoring a complete VM when all the VMDKs are on an NFS datastore and the plug-in does not need to use Storage vMotion

      Attaching and detaching VMDKs

      Mounting and unmounting datastores

      Guest file restores

    • What is not supported:

      Creating backups with VM consistency

      Restoring a complete VM when one or more VMDKs are on a VMFS datastore.

  • For a detailed list of the SnapCenter VMware plug-in limitations, see the SnapCenter Plug-in for VMware vSphere Release Notes.

License requirements

You must provide licenses for… License requirement

ONTAP

One of these: SnapMirror or SnapVault (for secondary data protection regardless of the type of relationship)

Additional products

vSphere Standard, Enterprise, or Enterprise Plus
A vSphere license is required to perform restore operations, which use Storage vMotion. vSphere Essentials or Essentials Plus licenses do not include Storage vMotion.

Primary destinations

To perform application-based protection over VMware
SnapCenter Standard
To perform protection of VMware VMs and datastores only
SnapRestore: used for restore operations
FlexClone: used for mount and attach operations

Secondary destinations

To perform application-based protection over VMware
SnapCenter Standard: used for failover operations
To perform protection of VMware VMs and datastores only
FlexClone: used for mount and attach operations

Software support

Item Supported versions

vCenter vSphere

HTML5 client: 6.5U2/U3, 6.7x, 7.0, 7.0U1, 7.0U2
Flex client is not supported.

ESXi

6.5U2

IP addresses

IPv4, IPv6

Java

8

.Net Core

2.1

SnapCenter Plug-in for VMware vSphere MySQL database

MySQL 8.0.23

VMware TLS

1.2

TLS on the SnapCenter Server

TLSv1.1 and later
The SnapCenter Server uses this to communicate with the SnapCenter VMware plug-in for application over VMDK data protection operations.

VMware application vStorage API for Array Integration (VAAI)

SnapCenter Plug-in for VMware vSphere uses this to improve performance for restore operations. It also improves performance in NFS environments.

For the latest information about supported versions, see the NetApp Interoperability Matrix Tool.

Space and sizing requirements

Item Requirements

Operating system

Linux

Minimum CPU count

4 cores

Minimum RAM

Minimum: 12 GB
Recommended: 16 GB

Minimum hard drive space for the SnapCenter Plug-in for VMware vSphere, logs, and MySQL database

100 GB

Connection and port requirements

Type of port Preconfigured port

SnapCenter Plug-in for VMware vSphere port

8144 (HTTPS), bidirectional
The port is used for communications from the VMware vSphere web client and from the SnapCenter Server.
8080 bidirectional
This port is used to manage the virtual appliance.
Note: You cannot modify the port configuration.

Storage cluster or storage VM port

443 (HTTPS), bidirectional
80 (HTTP), bidirectional
The port is used for communication between the virtual appliance and the storage VM or the cluster that contains the storage VM.

Configurations supported

Each plug-in instance supports only one vCenter Server. vCenters in linked mode are supported. Multiple plug-in instances can support the same SnapCenter Server as shown in the following figure.

Error: Missing Graphic Image

RBAC privileges required

The vCenter administrator account must have the required vCenter privileges, as listed in the following table.

To do this operation… You must have these vCenter privileges…

Deploy and register the SnapCenter Plug-in for VMware vSphere in vCenter

Extension: Register extension

Upgrade or remove the SnapCenter Plug-in for VMware vSphere

Extension

  • Update extension

  • Unregister extension

Allow the vCenter Credential user account registered in SnapCenter to validate user access to the SnapCenter Plug-in for VMware vSphere

sessions.validate.session

Allow users to access the SnapCenter Plug-in for VMware vSphere

SCV Administrator
SCV Backup
SCV Guest File Restore
SCV Restore
SCV View
The privilege must be assigned at the vCenter root.

AutoSupport

The SnapCenter Plug-in for VMware vSphere provides a minimum of information for tracking its usage, including the plug-in URL. AutoSupport includes a table of installed plug-ins that is displayed by the AutoSupport viewer.