Skip to main content
SnapCenter Plug-in for VMware vSphere 4.9
A newer release of this product is available.

Generate a support bundle from the SnapCenter Plug-in for VMware vSphere GUI

Contributors
PDFs
Before you begin

To log on to the SnapCenter Plug-in for VMware vSphere management GUI, you must know the IP address and the log in credentials. You must also note down the MFA token generated from the maintenance console.

  • The IP address was displayed when the SnapCenter VMware plug-in was deployed.

  • Use the log in credentials provided during the deployment of the SnapCenter VMware plug-in or as later modified.

  • Generate a 6-digit MFA token using the maintenance console System Configuration options.

Steps

  1. Log in to the SnapCenter Plug-in for VMware vSphere GUI.

    Use the format https://<OVA-IP-address>:8080.

  2. Click the Settings icon in the top toolbar.

    SnapCenter plug-in for VMware vSphere interface

  3. On the Settings page, in the Support section, click Generate Support Bundle.

  4. After the support bundle is generated, click the link that is provided to download the bundle to NetApp.