Tabs for the Nodes page
-
PDF of this doc site
- Install and upgrade software
-
Install and maintain hardware
- SG5700 storage appliances
- SG5600 storage appliances
-
Configure and manage
- Administer StorageGRID
- Use StorageGRID
-
Monitor and troubleshoot
- Monitor a StorageGRID system
Collection of separate PDF docs
Creating your file...
The tabs at the top of the Nodes page are based on what you select from the tree at the left.
Tab name | Description | Included for |
---|---|---|
Overview |
|
All nodes |
Hardware |
|
All nodes |
Network |
Displays a graph showing the network traffic received and sent across the network interfaces. |
All nodes, each site, and the entire grid |
Storage |
|
All nodes, each site, and the entire grid |
Events |
Displays a count of any system error or fault event, including errors such as network errors. |
All nodes |
Objects |
|
Storage Nodes, each site, and the entire grid |
ILM |
Provides information about Information Lifecycle Management (ILM) operations.
|
Storage Nodes, each site, and the entire grid |
Load Balancer |
Includes performance and diagnostic graphs related to the Load Balancer service.
|
Admin Nodes and Gateway Nodes, each site, and the entire grid |
Platform Services |
Provides information about any S3 platform service operations at a site. |
Each site |
SANtricity System Manager |
Provides access to SANtricity System Manager. From SANtricity System Manager, you can review hardware diagnostic and environmental information for the storage controller, as well as issues related to the drives. |
Storage appliance nodes Note: The SANtricity System Manager tab will not appear if the controller firmware on the storage appliance is less than 8.70. |