Skip to main content

Connect power cords and apply power (SGF6112)

Contributors netapp-pcelmer netapp-perveilerk netapp-lhalbert
PDFs

After connecting the network cables, you are ready to apply power to the appliance.

Steps

  1. Connect a power cord to each of the two power supply units in the appliance.

  2. Connect these two power cords to two different power distribution units (PDUs) in the cabinet or rack.

  3. If the power button on the front of the appliance is not currently illuminated blue, press the button to turn on power to the appliance.

    Don't press the power button again during the power-on process.

    The LED on the power supply should be illuminated green without blinking.

  4. If errors occur, correct any issues.

  5. Attach the front bezel to the appliance if removed.

Related information

View status indicators