Skip to main content
A newer release of this product is available.

Operations for multipart uploads

Contributors netapp-lhalbert netapp-perveilerk ssantho3
PDFs

This section describes how StorageGRID supports operations for multipart uploads.

The following conditions and notes apply to all multipart upload operations:

  • You should not exceed 1,000 concurrent multipart uploads to a single bucket because the results of List Multipart Uploads queries for that bucket might return incomplete results.

  • StorageGRID enforces AWS size limits for multipart parts. S3 clients must follow these guidelines:

    • Each part in a multipart upload must be between 5 MiB (5,242,880 bytes) and 5 GiB (5,368,709,120 bytes).

    • The last part can be smaller than 5 MiB (5,242,880 bytes).

    • In general, part sizes should be as large as possible. For example, use part sizes of 5 GiB for a 100 GiB object. Because each part is considered a unique object, using large part sizes reduces StorageGRID metadata overhead.

    • For objects smaller than 5 GiB, consider using non-multipart upload instead.

  • ILM is evaluated for each part of a multipart object as it is ingested and for the object as a whole when the multipart upload completes, if the ILM rule uses the Balanced or Strict ingest behavior. You should be aware of how this affects object and part placement:

    • If ILM changes while an S3 multipart upload is in progress, when the multipart upload completes some parts of the object might not meet current ILM requirements. Any part that is not placed correctly is queued for ILM re-evaluation, and is moved to the correct location later.

    • When evaluating ILM for a part, StorageGRID filters on the size of the part, not the size of the object. This means that parts of an object can be stored in locations that don't meet ILM requirements for the object as a whole. For example, if a rule specifies that all objects 10 GB or larger are stored at DC1 while all smaller objects are stored at DC2, at ingest each 1 GB part of a 10-part multipart upload is stored at DC2. When ILM is evaluated for the object as a whole, all parts of the object are moved to DC1.

  • All of the multipart upload operations support StorageGRID consistency controls.

  • As required, you can use server-side encryption with multipart uploads. To use SSE (server-side encryption with StorageGRID-managed keys), you include the x-amz-server-side-encryption request header in the Initiate Multipart Upload request only. To use SSE-C (server-side encryption with customer-provided keys), you specify the same three encryption key request headers in the Initiate Multipart Upload request and in each subsequent Upload Part request.

Operation Implementation

List Multipart Uploads

See List Multipart Uploads

Initiate Multipart Upload

See Initiate Multipart Upload

Upload Part

See Upload Part

Upload Part - Copy

See Upload Part - Copy

Complete Multipart Upload

See Complete Multipart Upload

Abort Multipart Upload

Implemented with all Amazon S3 REST API behavior. Subject to change without notice.

List Parts

Implemented with all Amazon S3 REST API behavior. Subject to change without notice.
Related information