Skip to main content
A newer release of this product is available.

Specify DNS server information

Contributors netapp-pcarriga netapp-perveilerk netapp-lhalbert
PDFs

You must specify DNS information for your StorageGRID system, so that you can access external servers using hostnames instead of IP addresses.

About this task

Specifying DNS server information allows you to use Fully Qualified Domain Name (FQDN) hostnames rather than IP addresses for email notifications and AutoSupport.

To ensure proper operation, specify two or three DNS servers. If you specify more than three, it is possible that only three will be used because of known OS limitations on some platforms. If you have routing restrictions in your environment, you can customize the DNS server list for individual nodes (typically all nodes at a site) to use a different set of up to three DNS servers.

If possible, use DNS servers that each site can access locally to ensure that an islanded site can resolve the FQDNs for external destinations.

If the DNS server information is omitted or incorrectly configured, a DNST alarm is triggered on each grid node's SSM service. The alarm clears when DNS is configured correctly and the new server information has reached all grid nodes.

Steps

  1. Specify the IPv4 address for at least one DNS server in the Server 1 text box.

  2. If necessary, select the plus sign next to the last entry to add additional server entries.

    This image is explained by the surrounding text.

    The best practice is to specify at least two DNS servers. You can specify up to six DNS servers.

  3. Select Next.