Skip to main content

Navigate to the Grid Manager

Contributors netapp-perveilerk netapp-lhalbert
PDFs

You use the Grid Manager to define all of the information required to configure your StorageGRID system.

Before you begin

The primary Admin Node must be deployed and have completed the initial startup sequence.

Steps

  1. Open your web browser and navigate to:

    https://primary_admin_node_ip

    Alternatively, you can access the Grid Manager on port 8443:

    https://primary_admin_node_ip:8443

    You can use the IP address for the primary Admin Node IP on the Grid Network or on the Admin Network, as appropriate for your network configuration.

  2. Manage a temporary installer password as needed:

    • If a password has already been set using one of these methods, enter the password to proceed.

      • A user set the password while accessing the installer previously

      • The password was automatically imported from the node config file at /etc/storagegrid/nodes/<node_name>.conf

    • If a password has not been set, optionally set a password to secure the StorageGRID installer.

  3. Select Install a StorageGRID system.

    The page used to configure a StorageGRID system appears.

    This image is explained by the surrounding text.