Skip to main content
VSC, VASA Provider, and SRA 9.7

Configure Storage Replication Adapter for SAN environment


You must set up the storage systems before running Storage Replication Adapter (SRA) for Site Recovery Manager (SRM).

Before you begin

You must have installed the following programs on the protected site and the recovery site:

  1. Verify that the primary ESXi hosts are connected to the LUNs in the primary storage system on the protected site.

  2. Verify that the LUNS are in igroups that have the ostype option set to vmware on the primary storage system.

  3. Verify that the ESXi hosts at the recovery site have appropriate FC or iSCSI connectivity to the .

    You can do this either by verifying that the ESXi hosts have local LUNs connected on the or by using the fcp show initiators command or the iscsi show initiators command on the .