Skip to main content
VSC, VASA Provider, and SRA 9.7

Install the NFS VAAI plug-in

Contributors
PDFs

You can install the NFS Plug-in for VMware vStorage APIs for Array Integration (VAAI) using the GUI of the virtual appliance for Virtual Storage Console (VSC), VASA Provider, and Storage Replication Adapter (SRA).

Before you begin

  • You must have downloaded the installation package for the NFS Plug-in for VAAI (.vib) from .

    NetApp Support

  • You must have installed ESXi host 6.5 or later and ONTAP 9.1 or later.

  • You must have powered on the ESXi host and mounted an NFS datastore.

  • You must have set the values of the DataMover.HardwareAcceleratedMove, DataMover.HardwareAcceleratedInit, and VMFS3.HardwareAcceleratedLocking host settings to “1”.

    These values are set automatically on the ESXi host when the Recommended Settings dialog box is updated.

  • You must have enabled the vstorage option on the by using the vserver nfs modify -vserver vserver_name -vstorage enabled command.

Steps

  1. Rename the .vib file that you downloaded from to NetAppNasPlugin.vib to match the predefined name that VSC uses.

  2. Click Settings in the VSC home page.

  3. Click NFS VAAI Tools tab.

  4. Click Change in the Existing version section.

  5. Browse and select the renamed .vib file, and then click Upload to upload the file to the virtual appliance.

  6. In the Install on ESXi Hosts section, select the ESXi host on which you want to install the NFS VAAI plug-in, and then click Install.

    You should follow the on-screen instructions to complete the installation. You can monitor the installation progress in the Tasks section of vSphere Web Client.

  7. Reboot the ESXi host after the installation finishes.

    When you reboot the ESXi host, VSC automatically detects the NFS VAAI plug-in. You do not have to perform additional steps to enable the plug-in.