Skip to main content
OnCommand Workflow Automation 5.0
A newer release of this product is available.

Configure a database user by running ocsetup on Windows

Contributors
PDFs

You can run the ocsetup file on the Active IQ Data Center Manager server to configure read-only access of the Active IQ Data Center Manager database to OnCommand Workflow Automation.

Steps

  1. Download the wfa_ocsetup.exe file to a directory in the Active IQ Data Center Manager server from the following location: https://WFA_Server_IP/download/wfa_ocsetup.exe.

    WFA_Server_IP is the IP address (IPv4 or IPv6 address) of your WFA server.

    If you have specified a non-default port for WFA, you must include the port number as follows: https://wfa_server_ip:port/download/wfa_ocsetup.exe.

    port is the TCP port number that you have used for the WFA server during installation.

    If you are specifying an IPv6 address, you must enclose it with square brackets.

  2. Double-click the wfa_ocsetup.exe file.

  3. Read the information in the setup wizard and click Next.

  4. Browse or type the JRE location and click Next.

  5. Enter a user name and password to override the default credentials.

    A new database user account is created with access to the Active IQ Data Center Manager database.

    Note If you do not create a user account, the default credentials are used. You must create a user account for security purposes.

  6. Click Next and review the results.

  7. Click Next, and then click Finish to complete the wizard.