简体中文版经机器翻译而成，仅供参考。如与英语版出现任何冲突，应以英语版为准。

HPUX Host Utilities 6.0

05/03/2022

SAN 工具包
安装 HPUX Host Utilities
命令参考示例

您需要什么？ #8217 ；将需要什么

为了确保操作可靠，您必须验证您的整个 iSCSI ， FC 或 FCoE 配置是否受支持。

SAN 工具包

HPUX Host Utilities 是一款 NetApp 主机软件，可在 HPUX 主机上提供命令行工具包。此工具包会在您安装 NetApp Host Utilities 软件包时安装。此套件提供 sanlun 实用程序，可帮助您管理 LUN 和 HBA 。sanlun 命令可返回有关映射到主机的 LUN 的信息，多路径以及创建启动程序组所需的信息。

在以下示例中， sanlun lun show 命令将返回 LUN 信息。

# sanlun lun show all

controller(7mode)/ device host lun
vserver(Cmode)           lun-pathname                   filename          adapter    protocol   size   mode
------------------------------------------------------------------------------------------------------------
sanboot_unix         /vol/hpux_boot/boot_hpux_lun      /dev/rdsk/c34t0d0  fclp1      FCP        150g    C
sanboot_unix         /vol/hpux_boot/boot_hpux_lun      /dev/rdsk/c23t0d0  fclp1      FCP        150g    C
sanboot_unix         /vol/hpux_boot/boot_hpux_lun      /dev/rdsk/c12t0d0  fclp0      FCP        150g    C
sanboot_unix         /vol/hpux_boot/boot_hpux_lun      /dev/rdsk/c81t0d0  fclp0      FCP        150g    C

此工具包在 Host Utilities 的所有配置和协议中通用。因此，其中某些内容适用于一种配置，而不适用于另一种配置。未使用的组件不会影响系统性能。

安装 HPUX Host Utilities

可从上获取 NetApp HPUX Host Utilities 软件包 "NetApp 支持站点" 在压缩文件中。

您可以从下载包含 Host Utilities 软件包的压缩文件 "NetApp 支持站点"。下载文件后，必须在安装之前对其进行解压缩。

步骤

登录到主机。
从下载 HP-UX Host Utilities 文件 netapp_hpux_host_utilities_6.0_ia_pa.depot.gz "NetApp 支持站点" 连接到 HP-UX 主机。
输入以下命令解压缩 netapp_hpux_host_utilities_6.0_ia_pa.depot.gz 文件：

` # gunzip netapp_hpux_host_utilities_6.0_ia_pa.depot.gz`

系统会将提取的软件置于您将存储库文件解压缩到的目录中。
输入以下命令以安装软件：

` # swinstall -s /storage_path`

dept_path 提供存储库文件的路径和名称。

swinstall 命令可运行一个安装脚本，用于验证 HP-UX 设置的状态。如果您的系统满足要求，此脚本会将 sanlun 实用程序和诊断脚本安装在 ` /opt/netapp/santools/bin` 目录中。
验证安装。

sanlun 版本

命令参考示例

列出映射到主机的所有主机启动程序

# sanlun fcp show adapter -v
adapter name:      fclp2
WWPN:              10000000c985ef92
WWNN:              20000000c985ef92
driver name:       fclp
model:             AJ763-63001
model description: HP 8Gb Dual Channel PCI-e 2.0 FC HBA
serial number:     MY19034N9U
hardware version:  3
driver version:    @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.31.1805, Feb  5 2018, FCLP_IFC (3,2)
firmware version:  2.02X2 SLI-3 (U3D2.02X2)
Number of ports:   1 of 2
port type:         Unknown
port state:        Link Down
supported speed:   8 GBit/sec
negotiated speed:  Speed not established
OS device name:    /dev/fclp2

adapter name:      fclp3
WWPN:              10000000c985ef93
WWNN:              20000000c985ef93
driver name:       fclp
model:             AJ763-63001
model description: HP 8Gb Dual Channel PCI-e 2.0 FC HBA
serial number:     MY19034N9U
hardware version:  3
driver version:    @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.31.1805, Feb  5 2018, FCLP_IFC (3,2)
firmware version:  2.02X2 SLI-3 (U3D2.02X2)
Number of ports:   2 of 2
port type:         Unknown
port state:        Link Down
supported speed:   8 GBit/sec
negotiated speed:  Speed not established
OS device name:    /dev/fclp3

列出映射到主机的所有 LUN

# sanlun lun show -p -v all
\
                    ONTAP Path: vs_hp_cluster:/vol/chathpux_217_vol_en_1_10/hp_en_217_lun
                           LUN: 55
                      LUN Size: 15g
                   Host Device: /dev/rdisk/disk718
                          Mode: C
                            VG: /dev/vg_data
              Multipath Policy: A/A
            Multipath Provider: Native
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
host     vserver    /dev/dsk                                                                    HP A/A
path     path       filename             host    vserver                                        path failover
state    type       or hardware path     adapter LIF                                            priority
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
up       primary    /dev/dsk/c37t6d7     fclp0   hpux_7                                         0
up       primary    /dev/dsk/c22t6d7     fclp1   hpux_8                                         0
up       secondary  /dev/dsk/c36t6d7     fclp0   hpux_5                                         1
up       secondary  /dev/dsk/c44t6d7     fclp1   hpux_6                                         1

列出从给定 SVM 映射到主机的所有 LUN

# sanlun lun show -p -v vs_hp_cluster
                    ONTAP Path: vs_hp_cluster:/vol/chathpux_217_vol_en_1_10/hp_en_217_lun
                           LUN: 55
                      LUN Size: 15g
                   Host Device: /dev/rdisk/disk718
                          Mode: C
                            VG: /dev/vg_data
              Multipath Policy: A/A
            Multipath Provider: Native
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
host     vserver    /dev/dsk                                                                    HP A/A
path     path       filename             host    vserver                                        path failover
state    type       or hardware path     adapter LIF                                            priority
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
up       primary    /dev/dsk/c37t6d7     fclp0   hpux_7                                         0
up       primary    /dev/dsk/c22t6d7     fclp1   hpux_8                                         0
up       secondary  /dev/dsk/c36t6d7     fclp0   hpux_5                                         1
up       secondary  /dev/dsk/c44t6d7     fclp1   hpux_6                                         1

列出映射到主机的给定 LUN 的所有属性

# sanlun lun show -p -v vs_hp_cluster:/vol/chathpux_217_vol_en_1_5/hp_en_217_lun

                    ONTAP Path: vs_hp_cluster:/vol/chathpux_217_vol_en_1_5/hp_en_217_lun
                           LUN: 49
                      LUN Size: 15g
                   Host Device: /dev/rdisk/disk712
                          Mode: C
                            VG: /dev/vg_data
              Multipath Policy: A/A
            Multipath Provider: Native
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
host     vserver    /dev/dsk                                                                    HP A/A
path     path       filename             host    vserver                                        path failover
state    type       or hardware path     adapter LIF                                            priority
-------- ---------- -------------------- ------- ---------------------------------------------- -------------
up       primary    /dev/dsk/c37t6d1     fclp0   hpux_7                                         0
up       primary    /dev/dsk/c22t6d1     fclp1   hpux_8                                         0
up       secondary  /dev/dsk/c36t6d1     fclp0   hpux_5                                         1
up       secondary  /dev/dsk/c44t6d1     fclp1   hpux_6                                         1

按主机设备文件名列出 ONTAP LUN 属性

#sanlun lun show -dv /dev/rdisk/disk716
                                                                 device             host                  lun
vserver              lun-pathname                                filename           adapter    protocol   size    mode
----------------------------------------------------------------------------------------------------------------------
vs_hp_cluster        /vol/chathpux_217_vol_en_1_14/hp_en_217_lun /dev/rdisk/disk716 0          FCP        15g     C
             LUN Serial number: 80D7l?NiNP5U
         Controller Model Name: AFF-A800
          Vserver FCP nodename: 208400a098ba7afe
          Vserver FCP portname: 207e00a098ba7afe
              Vserver LIF name: hpux_5
            Vserver IP address: 10.141.54.30
                                10.141.54.35
                                10.141.54.37
                                10.141.54.33
                                10.141.54.31
           Vserver volume name: chathpux_217_vol_en_1_14        MSID::0x00000000000000000000000080915935
         Vserver snapshot name:

列出连接到主机的所有 SVM 目标 LIF WWPN

# sanlun lun show -wwpn

controller(7mode)/
vserver(Cmode)       target wwpn        lun-pathname                                  device filename
--------------------------------------------------------------------------------------------------------
vs_hp_cluster        208300a098ba7afe   /vol/chathpux_217_vol_en_1_10/hp_en_217_lun   /dev/rdsk/c22t6d7
vs_hp_cluster        208100a098ba7afe   /vol/chathpux_217_vol_en_1_10/hp_en_217_lun   /dev/rdsk/c44t6d7
vs_hp_cluster        208200a098ba7afe   /vol/chathpux_217_vol_en_1_10/hp_en_217_lun   /dev/rdsk/c37t6d7
vs_hp_cluster        207e00a098ba7afe   /vol/chathpux_217_vol_en_1_10/hp_en_217_lun   /dev/rdsk/c36t6d7
vs_hp_cluster        207d00a098ba7afe   /vol/chathpux_217_os/hp_217_os                /dev/rdsk/c18t7d4
vs_hp_cluster        207f00a098ba7afe   /vol/chathpux_217_os/hp_217_os                /dev/rdsk/c42t7d4

host adapter    lun size    mode
---------------------------------
fclp1           15g         C
fclp1           15g         C
fclp0           15g         C
fclp0           15g         C
fclp1           30g         C
fclp0           30g         C

Creating your file...