简体中文版经机器翻译而成,仅供参考。如与英语版出现任何冲突,应以英语版为准。

使用 SP/BMC 命令行界面上的联机帮助

提供者 netapp-aoife

联机帮助显示 SP/BMC 命令行界面命令和选项。

此任务会同时对 SP 和 BMC 执行适用场景。

步骤
  1. 要显示 SP/BMC 命令的帮助信息,请输入以下命令:

    要访问 SP 帮助 …​ 要访问 BMC 帮助 …​

    在 SP 提示符处键入 help

    在 BMC 提示符处键入 ssystem

    以下示例显示了 SP CLI 联机帮助。

    SP> help
    date - print date and time
    exit - exit from the SP command line interface
    events - print system events and event information
    help - print command help
    priv - show and set user mode
    sp - commands to control the SP
    system - commands to control the system
    version - print SP version

    以下示例显示了 BMC 命令行界面联机帮助。

    BMC> system
    system acp - acp related commands
    system battery - battery related commands
    system console - connect to the system console
    system core - dump the system core and reset
    system cpld - cpld commands
    system log - print system console logs
    system power - commands controlling system power
    system reset - reset the system using the selected firmware
    system sensors - print environmental sensors status
    system service-event - print service-event status
    system fru - fru related commands
    system watchdog - system watchdog commands
    
    BMC>
  2. 要显示 SP/BMC 命令选项的帮助信息,请在 SP/BMC 命令之前或之后输入 help

    以下示例显示了 SP Events 命令的 SP 命令行界面联机帮助。

    SP> help events
    events all - print all system events
    events info - print system event log information
    events newest - print newest system events
    events oldest - print oldest system events
    events search - search for and print system events

    以下示例显示了 BMC ssystem power 命令的 BMC 命令行界面联机帮助。

    BMC> system power help
    system power cycle - power the system off, then on
    system power off - power the system off
    system power on - power the system on
    system power status - print system power status
    
    BMC>